| This product has been discontinued. |
|
Specifications
|
Transport |
| No. of Recording Units | 2 |
| Pancake Diameter | max. 12.5" |
| Tape | Type I (normal), Type II (chrome) |
| Tape Width | 0.15" cassette tape |
| No. of Tracks | 4 |
| Tape Speed (copy speed) | 120 ips. (64x cassette tape speed) |
| Speed Deviation | Within ±0.15% |
| Wow & Flutter | Less than 0.1% (DIN 45507 PEAK WTD) |
| Tape Drive | Capstan Motor: PLL servo DC direct drive motor
Supply Reel and Take-up Motors: AC motor |
|
Electronics |
| Record Head | 2-track ferrite head x 2 |
| Equalization | One EQ setting (for 64x speed) |
| Bias | Two BIAS settings (remotely switchable, master bias type) |
| Record Amplifier | 1 channel x 8 |
| Record Signal Input | Frequency Response: Flat frequency response
Connector: BNC type (CH1 - CH4)
Input Impedance: min. 10 kΩ |
| Frequency Response | 40 Hz to 18 kHz, +2/-3 dB (64x)
100 Hz to 16 kHz, ±2 dB (64x) |
| Signal-to-Noise Ratio | Within 4 dB of blank tape |
| Distortion | Less than 3% (1 kHz, 250 nWb/m) |
| Crosstalk | Better than 65 dB (CH2 to 3, @1 kHz)
Better than 35 dB (CH1 to 2, @1 kHz) |
| Remote Control | Commands: START, STOP, BIAS A/B
Type: Parallel communication
Connector: D-sub 9-pin type |
|
Physical |
| Power Supply | 100/110/117/200/220/240 VAC ±5%, 50/60 Hz |
| Power Consumption | 330 VA (peak 590 VA) |
| Weight | 76 kg |
| Dimensions (W x H x D) | 870 x 894 x 430 mm |
| Operating Environment | 10 to 30°C, 20 to 80% RH |
| Storage Environment | -20 to 45°C, 10 to 80% RH |
|
NOTE: The above system characteristics are an example of the performance of the DP-55 under conditions specified separately, and Otari has no obligation to guarantee these characteristics.
Specifications are subject to change without notice or obligation.
|
home